# Value of '100' is not valid for 'Value'... error

**URL:** <https://forum.loinc.org/t/value-of-100-is-not-valid-for-value-error/676>\
**Category:** bug-report\
**Created:** [January 13, 2010, 5:01pm UTC](https://forum.loinc.org/t/value-of-100-is-not-valid-for-value-error/676 "2010-01-13T17:01:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lmccamy](https://forum.loinc.org/letter_avatar_proxy/v4/letter/l/db5fbb/32.png) [@lmccamy](https://forum.loinc.org/u/lmccamy)\
**Post date:** [January 13, 2010, 5:01pm UTC](https://forum.loinc.org/t/value-of-100-is-not-valid-for-value-error/676/1 "2010-01-13T17:01:42Z")

</div>

I downloaded RELMA yesterday. I installed it on my machine. I imported my local terms using a pipe delimited file. It imported properly. I then went into Tools → Concepts in Local Term File Unknown to RELMA. I did not get the first time error described in the user manual. I went ahead and defined many terms. Everything looked good. I was able to view my local terms in Map Local Terms to LOINC. I exited out of the program. I later attempted to open the program again and received the following error which is not allowing me to open the program at all:  
  
  
  
Value of ‘100’ is not valid for ‘Value’. ‘Value’ should be between ‘minimum’ and ‘maximum’. Parameter name: Value. The program cannot function without a valid LMOF database.  
  
  
  
I am a programmer, not a lab person, so I opened up the database to see if I could see anything that would cause this error. The database opens and functions appropriately. I can’t see anything that would cause this error. I also performed a Google search on the error and I’m finding it to be a .NET error.  
  
  
  
Can you please help? Thanks. Lisa

---

<div class="post-metadata">

**Author:** ![markleightonfisher](https://forum.loinc.org/letter_avatar_proxy/v4/letter/m/f6c823/32.png) [@markleightonfisher](https://forum.loinc.org/u/markleightonfisher)\
**Post date:** [January 19, 2010, 3:46pm UTC](https://forum.loinc.org/t/value-of-100-is-not-valid-for-value-error/676/2 "2010-01-19T15:46:29Z")

</div>

Dear Ms. McCamy,  
  
  
  
Would it be possible for you to send us a copy of your LMOF3.MDB file? This would greatly assist in finding the cause of the problem.  
  
  
  
Mark Leighton Fisher  
  
[mfisher@regenstrief.org](mailto:mfisher@regenstrief.org)

---

<div class="post-metadata">

**Author:** ![system](https://forum.loinc.org/uploads/default/original/1X/dbab97ce9b2987d788a376e254fcaae249f3b672.png) [@system](https://forum.loinc.org/u/system)\
**Post date:** [June 23, 2023, 3:36pm UTC](https://forum.loinc.org/t/value-of-100-is-not-valid-for-value-error/676/3 "2023-06-23T15:36:22Z")

</div>